Insulation fastener FIF-CS 8/1 8/160 FISCHER

The ETA-approved fischer Putzdübel FIF-CS plaster anchor is ideal for securely fastening pressure-resistant insulation materials up to 340 mm thick for thermal insulation composite systems such as polystyrene insulation boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete, and aerated concrete. The uniform embedment depth for all building materials simplifies installation. The screw anchor consists of a gray anchor sleeve with an attached octagonal plate and a compound screw. The compound screw minimizes thermal bridging. This prevents anchor marks on the facade. The FIF-CS 8 is installed with a standard screwdriver. Marketing Claim: The economical screw anchor for all ETICS insulation material types. Advantages: The compound screw (steel-plastic combination) minimizes thermal bridging. This prevents anchor marks on the facade. A minimum embedment depth of 35 mm in the load-bearing substrate ensures low drill bit wear and reduces drilling time. For flush-mounted insulation, the very thin plate ensures optimal adhesion to the insulation board and the application of thin reinforcing layers. For insulation material thicknesses up to 340 mm. One embedment depth for all building materials. Top Features: High load capacity due to innovative compound screw. Low embedment depth for all building material classes reduces drilling effort. This saves time and costs. No marks on the plaster surface: Glass fiber reinforced compound screw with steel tip reduces heat transfer. Further technical properties: · Drive: TX30 · ETA approval: Yes · Professional / DIY: Professional · VDS approval: Yes · Max. usable length: 170mm