Insulation Fastener FIF-CS 8/1 8/100 FISCHER

The ETA-approved fischer plaster plug FIF-CS is ideal for securely fastening pressure-resistant insulation materials up to 340 mm thick for thermal insulation composite systems (ETICS) such as polystyrene insulation boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete, and aerated concrete. The uniform setting depth for all building materials simplifies installation. The screw anchor consists of a gray plug sleeve with an attached octagonal plate and a compound screw. The compound screw minimizes thermal bridging, preventing ghosting on the facade. The FIF-CS 8 is installed with a standard screwdriver. Marketing Claim: The economical screw anchor for all ETICS insulation types. Advantages: The compound screw (steel-plastic combination) minimizes thermal bridging, thus preventing ghosting on the facade. A minimum embedment depth of 35 mm in the load-bearing substrate ensures low drill bit wear and reduces drilling time. For flush-mounted installation in insulation material, the very thin plate ensures optimal adhesion to the insulation board and the application of thin reinforcement layers. For insulation thicknesses up to 340 mm. One embedment depth for all building materials. Top Features: High load-bearing capacity due to innovative compound screw. Low setting depth for all building material classes reduces drilling effort, saving time and costs. No ghosting on the plaster surface: Fiberglass-reinforced compound screw with steel tip reduces heat transmission. Further technical features: · Drive: TX30 · ETA approval: Yes · Pro / DIY: Pro · VDS approval: Yes · Max. usable length: 110mm