Insulation fastener FIF-CN II 8/60 FISCHER

The ETA-approved fischer plaster plug FIF-CN II is ideal for securely fastening pressure-resistant insulation materials up to 350 mm thick in plastered facades, such as polystyrene insulation boards, mineral wool boards, wood wool lightweight panels, and cork/coconut panels, in concrete, solid brick, and perforated brick. The plaster plug consists of a grey plug sleeve with an octagonal disc attached and a steel-plastic nail. The FIF-CN II is installed with a hammer. The innovative plastic nail with a steel tip enables high load capacities. Marketing Claim: The pre-assembled hammer-in plug with an innovative steel-plastic nail. Advantages: The compound nail (steel-plastic combination) minimizes thermal bridging. This prevents plug marks on the facade. Installs with just a few hammer blows. With a disc thickness of only 2.7 mm, the disc nestles perfectly into the insulation. This allows for cost-effective, thin reinforcement layers to be applied. High holding forces due to the steel tip of the compound nail. A shallow embedment depth of 35 mm saves drilling time. The compression zone in the shaft enables precise disc retraction. For insulation material thicknesses up to 340 mm. Top Features: Fewer plugs per square meter: high load capacity due to innovative plastic nail with steel tip. Hammer installation saves time. Shallow embedment depth reduces drilling effort. This saves time and costs. No premature spreading due to impact stop. No marks on the plaster surface: Fiberglass-reinforced plastic nail with steel tip reduces heat transfer. Further technical properties: · ETA approval: Yes · Professional / DIY: Professional · VDS approval: Yes · Max. usable length: 70mm