Insulation fastener DHK component thickness 200mm FISCHER

The fischer DHK insulation retainer is the economical plastic insulation retainer for insulation boards with low compressive strength. The DHK is installed by hammer-driving it through the insulation board into the substrate. When driven in, the ribs expand in the drill hole, ensuring the DHK is optimally pressed against the insulation. The fischer DHK insulation retainer is suitable for anchoring insulation boards in solid and perforated brick, concrete, and aerated concrete. Marketing claim: The economical plastic insulation retainer for all soft insulation boards. Top Features: Permanent contact pressure thanks to flexible webs in the plate area. Simple hammer-in installation saves time and money. Visually neutral joint pattern with black-laminated insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth. Advantages: The simple hammer-in installation allows for quick setting and thus reduces labor. The coloring of the DHK enables a visually neutral joint pattern on black-laminated insulation boards in ventilated facades. The optimized geometry of the expansion zone ensures a shallow anchorage depth and reduces drilling effort. Flexible webs in the plate area adapt to the insulation material and ensure permanent contact pressure. Further technical properties: · min. drill hole depth: 30mm · Building material: Solid brick Mz, solid and hollow sand-lime brick KS, perforated brick, perforated sand-lime brick KSL, concrete, POR3 · Installation type: Hammer-in anchor · Professional / DIY: Professional · VDS approval: Yes · Packaging variant: Folding carton · Max. usable length: 200mm Permanent contact pressure thanks to flexible webs in the plate area. Simple hammer-in installation saves time and money. Visually neutral joint pattern with black-laminated insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth.