Insulation fastener DHK component thickness 180mm FISCHER

The fischer insulation holder DHK is the economical plastic insulation holder for insulation boards with low compressive strength. The DHK is installed using through-fixing by hammering it in. When hammered in, the ribs expand in the drill hole and the DHK is optimally pressed against the substrate. The fischer insulation holder DHK is suitable for anchoring insulation boards in solid and perforated brick, concrete and aerated concrete. Marketing Claim: The economical plastic insulation holder for all soft insulation boards. Top Features: Permanent contact pressure due to flexible webs in the plate area. Simple hammer-in installation saves time and money. Visually neutral joint appearance with black-faced insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth. Advantages: The simple hammer-in installation enables a quick setting process, thus reducing the amount of work required. The coloring of the DHK allows for a visually neutral joint pattern on black-faced insulation boards in ventilated facades. The optimized geometry of the expansion zone ensures a shallow anchorage depth and reduces drilling effort. Flexible webs in the plate area adapt to the insulation material and ensure permanent contact pressure. Further technical features: · Min. drill hole depth: 30mm · Building material: Solid brick Mz, concrete, POR3, perforated sand-lime brick KSL, solid and block sand-lime brick KS, vertically perforated brick · Installation type: Hammer-in anchor · Professional / DIY: Professional · VDS approval: Yes · Packaging variant: Folding carton · Max. usable length: 180mm Permanent contact pressure due to flexible webs in the plate area. Simple hammer-in installation saves time and money. Visually neutral joint appearance with black-faced insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth.