Insulation fastener DHK component thickness 120mm FISCHER

The fischer DHK insulation retainer is the economical plastic insulation retainer for insulation boards with low compressive strength. The DHK is installed by push-through installation, hammered in. When hammered in, the ribs expand in the drill hole and the DHK is optimally pressed against the substrate. The fischer DHK insulation retainer is suitable for anchoring insulation boards in solid and perforated brick, concrete, and aerated concrete. Marketing claim: The economical plastic insulation retainer for all soft insulation boards. Top Features: Permanent contact pressure due to flexible webs in the plate area. Simple hammer-in installation saves time and costs. Visually neutral joint pattern with black-faced insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth. Advantages: The simple hammer-in installation enables quick setting and thus reduces labor. The coloring of the DHK allows for a visually neutral joint pattern on black-faced insulation boards in ventilated facades. The optimized geometry of the expansion zone ensures a low anchorage depth and reduces drilling effort. Flexible webs in the plate area adapt to the insulation material and ensure permanent contact pressure. Further technical properties: · min. drill hole depth: 30mm · Building material: Sand-lime solid and block brick KS, concrete, POR3, hollow brick, sand-lime perforated brick KSL, solid masonry brick Mz · Installation type: Hammer-in anchor · Pro / DIY: Pro · VDS approval: Yes · Packaging variant: Folding carton · Max. usable length: 120mm Permanent contact pressure due to flexible webs in the plate area. Simple hammer-in installation saves time and costs. Visually neutral joint pattern with black-faced insulation boards due to black coloring. Reduced drilling effort: Optimized geometry reduces anchorage depth.