Brink ventilation unit Flair 400 connections: 4 top, right

Flair 400 4/0 R - Standard
Heat recovery unit Flair 400
of the new generation for balanced
residential ventilation. Maximum air capacity
400 m3/h, highly efficient heat exchanger
made of plastic, filter ISO Coarse 60%
(approx. old filter class G4),
automatic bypass damper, touchscreen,
adjustable volume flows,
filter indicator on the unit and on the
step switch, intelligent
frost protection control with modulating
electric preheating coil, low
noise level, constant-flow control.
Unit available in left- or
right-hand version, as well as both
versions in Plus version. A
standard unit can also be easily
converted with the
Plus board (UWA2-E). Included in the scope of delivery
of the unit are sound-insulated
suspension as well as the siphon for the
condensate drain. The Flair 400 has a
connection for a step switch
(optional) with boost stage (30 minutes
boost ventilation), the same connection
can optionally be used for demand-controlled
ventilation 2.0, as well as
optional wireless remote control
(receiver with transmitter(s). Equipment
with 2 step switches, or 1
step switch and 1 wireless
remote control is also possible,
however, with additional use
of a splitter. To the eBUS connection
e.g. the Air Control (optional)
or one or more CO2 sensors
(optional) can be connected. A
supply voltage of 24V/= can be tapped
from the basic board (UWA2-B).
An optional humidity sensor
can also be connected to the basic board.
ModBus or
BrinkBus (coupling of several devices, or
sensors). A signal output allows
an external filter and
fault indicator. Easy operation
is possible with the touchscreen (already
integrated). USB connection.
Network Wifi/LAN with Plus version.
For further communication. Technical
data: Operating voltage 230V/50Hz, dimensions
W:H:D = 750:650:560 mm, connections
air ducts DN 160, outer diameter
condensate drain 32 mm, weight 37 kg,
filter class ISO Coarse 60%, ISO ePM1
for supply air optional. Ventilation stages
Factory setting minimum: 50m3/h, stage
1: 150m3/h, stage 2: 200m3/h, stage 3:
300 m3/h and max.: 400 m3/h.
Standard version in right-hand design
(exhaust air top front left, fresh air
top rear left, extract air top front
right, supply air top rear right. Type:
Flair 400 R/0R - Article number 431009 -
Supplier: Brink Climate Systems
Deutschland GmbH - D-48683 Ahaus -
www.brinkclimatesystems.de