Brink Flair 400 ventilation unit connections: 4 top, left

Flair 400 4/0 L - Standard
Flair 400 heat recovery unit
of the new generation for balanced
residential ventilation. Maximum air capacity
400m3/h, highly efficient plastic heat exchanger,
ISO Coarse 60% filter
(approximately old filter class G4),
automatic bypass damper, touchscreen,
adjustable volumetric flow rates,
filter display on the unit and on the
step switch, intelligent
frost protection control with modulating
electric preheating coil, low
noise level, constant flow control.
Unit available in left or
right version, as well as both
versions in Plus version. A
standard unit can also be easily
converted with the Plus board (UWA2-E). Included
with the unit are sound-insulated
hangers as well as the siphon for condensate drainage.
The Flair 400 has a connection for a step switch
(optional) with boost stage (30 minutes
boost ventilation), the demand-controlled
ventilation 2.0 can optionally be connected to the same connection,
as well as an optional wireless remote control
(receiver with transmitter(s)). Equipping
with 2 step switches, or 1
step switch and 1 wireless
remote control is also possible,
however with additional use
of a splitter. The eBUS connection
can be used to connect, for example, the Air Control (optional)
or one or more CO2 sensors
(optional). A
24V/= supply voltage can be tapped
from the base board (UWA2-B). An optional humidity sensor
can also be connected to the base board.
ModBus or
BrinkBus (coupling of several devices or
sensors). A signal output enables
an external filter and
fault display. Easy operation
is possible with the touchscreen (already
integrated). USB connection.
Network Wifi/LAN with Plus version.
For further communication. Technical
data: Operating voltage 230V/50Hz, dimensions
W:H:D = 750:650:560 mm, connections
air ducts DN 180, outside diameter
condensate drain 32 mm, weight 37 kg,
filter class ISO Coarse 60%, ISO ePM1
for supply air optional. Ventilation stages
factory setting minimum: 50m3/h, stage
1: 150m3/h, stage 2: 200m3/h, stage 3:
300 m3/h and max.: 400 m3/h.
Current consumption with preheating coil
switched on 5A. Standard version in
left-hand design (exhaust air top rear
right, fresh air top front right,
extract air top rear left, supply air top
front left. Type: Flair 400 4/0L -
Article number 431008 - Supplier: Brink
Climate Systems Deutschland GmbH -
D-48683 Ahaus -
www.brinkclimatesystems.de