Brink Ventilation Unit Flair 325 Connections: 4 top, right

Flair 325 4/0 R - Standard
Heat recovery unit Flair 325
of the new generation for balanced
residential ventilation. Maximum airflow
325m3/h, highly efficient heat exchanger
made of plastic, filter ISO Coarse 60%
(approx. old filter class G4),
automatic bypass flap, touchscreen,
adjustable volume flows,
filter indicator on the unit and on the
step switch, intelligent
frost protection control with modulating
electric pre-heater, low
noise level, constant flow control.
Unit available in left or
right version, as well as both
versions in Plus version. A
standard unit can also be easily
modified with the
Plus board (UWA2-E). Included in the scope of
delivery of the unit are sound-insulated
suspension as well as the siphon for the
condensate drain. The Flair 325 has a
connection for a step switch
(optional) with boost level (30 minutes
intensive ventilation), to the same connection
the demand-controlled
ventilation 2.0 can be optionally connected, as well as
optionally a wireless remote control
(receiver with transmitter(s)). An
equipment with 2 step switches, or 1
step switch and 1 wireless
remote control is also possible,
however with additional use
of a splitter. To the eBUS connection
e.g. the Air Control (optional)
or one or more CO2 sensors
(optional) can be connected. A
supply voltage of 24V/= can be tapped
from the base board (UWA2-B). An optional humidity sensor
can also be connected to the base board.
ModBus or
BrinkBus (coupling of several devices or
sensors) A signal output enables
external filter and
malfunction indication. Simple operation
is possible with the touchscreen (already
integrated). USB connection.
Network Wifi/LAN in Plus version.
For further communication. Technical
data: Operating voltage 230V/50Hz, dimensions
W:H:D = 750:650:560 mm, connections
air ducts DN 160, outer diameter
condensate drain 32 mm, weight 37 kg,
filter class ISO Coarse 60%, ISO ePM1
for supply air optional. Ventilation levels
factory setting minimum: 50m3/h, level
1: 100m3/h, level 2: 150m3/h, level 3:
250 m3/h and max.: 325 m3/h. At 150
m3/h applies: permissible resistance in the
duct system 21-53 Pa, power consumption
(without pre-heater) 15.1-21 W,
current consumption without pre-heater
0.15-0.21 A, max. current consumption with
pre-heater switched on 5A.
Standard version in right-hand design
(exhaust air top front left, fresh air
top rear left, extract air top front
right, supply air top rear right. Type:
Flair 325 R/0R - Article number 430005 -
Supplier: Brink Climate Systems
Deutschland GmbH - D-48683 Ahaus -
www.brinkclimatesystems.de