Brink Flair 325 ventilation unit Connections: 4 top, left

Flair 325 4/0 L - Standard
Flair 325 heat recovery unit
of the new generation for balanced
residential ventilation. Maximum air flow
325m3/h, highly efficient heat exchanger
made of plastic, filter ISO Coarse 60%
(approx. old filter class G4),
automatic bypass damper, touchscreen,
adjustable volume flows,
filter indicator on the unit and on the
step switch, intelligent
frost protection control with modulating
electric preheating coil, low
noise level, constant flow control.
Unit available in left-hand or
right-hand version, as well as both
versions in Plus variant. A
standard unit can also be easily
converted with the
Plus board (UWA2-E). Included in the scope of delivery
of the unit are sound-insulated
suspension as well as the siphon for the
condensate drain. The Flair 325 has a
connection for a step switch
(optional) with boost stage (30 minutes
shock ventilation), to the same connection
can optionally be connected the demand-controlled
ventilation 2.0, as well as
optionally a wireless remote control
(receiver with transmitter(s). An
equipment with 2 step switches, or 1
step switch and 1 wireless
remote control is also possible,
however, with additional use
of a splitter. To the eBUS connection
can, for example, the Air Control (optional)
or one or more CO2 sensors
(optional) be connected. A
supply voltage of 24V/= can be tapped
from the basic board (UWA2-B). An optional humidity sensor
can also be connected to the basic board.
ModBus or
BrinkBus (coupling of several devices, or
sensors). A signal output allows
external filter and
fault indication. Easy operation
is possible with the touchscreen (already
integrated). USB connection.
Network Wlan/Lan for Plus version.
For further communication. Technical
data: Operating voltage 230V/50Hz, Dimensions
W:H:D = 750:650:560 mm, Connections
air ducts DN 160, outer diameter
condensate drain 32 mm, weight 37 kg,
filter class ISO Coarse 60%, ISO ePM1
for supply air optional. Ventilation stages
Factory setting minimum: 50m3/h, stage
1: 100m3/h, stage 2: 150m3/h, stage 3:
250 m3/h and max.: 325 m3/h. At 150
m3/h applies: permissible resistance in the
duct system 21-53 Pa, power consumption
(without preheating coil) 15.1-21 W,
current consumption without preheating coil
0.15-0.21 A, max. current consumption with
preheating coil switched on 5A.
Standard version in left-hand design
(exhaust air top rear right, fresh air
top front right, extract air top rear
left, supply air top front left. Type:
Flair 325 4/0L - Article number 430004 -
Supplier: Brink Climate Systems
Deutschland GmbH - D-48683 Ahaus -
www.brinkclimatesystems.de