Bolt Anchor FBN II M8xL99mm 8/70 Electro-galvanized steel FISCHER

The fischer Bolt Anchor FBN II is a steel anchor for economic fastenings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer Bolt Anchor FBN II is particularly flexible to use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanised steel version, the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economic fastening for flexible use in uncracked concrete. Advantages: The standard embedment depth achieves maximum load capacities. This means fewer fastening points and smaller anchor plates are needed. The reduced embedment depth decreases the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal tightening slippage ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With the standard embedment depth, the FBN II achieves maximum load capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it decreases the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with a few hammer blows and minimal slippage. Further technical properties: · Anchor length: 130mm · Push-through installation: Yes · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 126mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 40 / 30mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 70mm · Max. usable length hef,stand./hef,min.: 70 / 80mm Easy installation with a few hammer blows and minimal slippage. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it decreases the drill hole depth and simplifies installation.