Bolt anchor FBN II M8xL79mm 8/50 FISCHER

The fischer bolt anchor FBN II is a steel anchor for economical fixings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to push-through and pre-setting installations, the bolt anchor is also suitable for stand-off installations. In the electro-galvanized steel version, the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fixing for flexible use in uncracked concrete. Advantages: The standard embedment depth achieves the highest load capacities. This means fewer fixing points and smaller anchor plates are needed. The reduced embedment depth reduces the drill hole depth. This decreases installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal torque slip ensure noticeably easy installation. The impact pin protects the thread from damage, saving time during assembly and disassembly of the attached component. Top Features: With the standard embedment depth, the FBN II achieves maximum load capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated for by the long thread. Additionally, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with just a few hammer blows and minimal slip. Further technical properties: · Anchor length: 110mm · Push-through installation: Yes · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 106mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 40 / 30mm · Packaging variant: Folding box · Pre-setting installation: Yes · Max. thickness of attached component: 50mm · Max. usable length hef,stand./hef,min.: 50 / 60mm Easy installation with just a few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated for by the long thread. Additionally, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.