Throughbolt FBN II M8xL34mm FISCHER

The fischer Bolt Anchor FBN II is a steel anchor for economic fastenings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer Bolt Anchor FBN II is particularly flexible in use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanized steel version, the bolt anchor is suitable for railings, cable trays, and brackets in indoor areas. Marketing Claim: The economical fastening for flexible use in uncracked concrete. Advantages: The standard embedment depth achieves the highest load-bearing capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth lowers the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thereby increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The drive-in stud protects the thread from damage, ensuring time-saving assembly and disassembly of the attached component. Top Features: With its standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. Additionally, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with a few hammer blows and minimal slip. Further technical properties: · Anchor length: 65mm · Push-through installation: Yes · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 61mm · Professional / DIY: Professional · Test marks / Approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 40 / 30mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attached component: 5mm · Max. effective length hef,stand./hef,min.: 5 / 15mm Easy installation with a few hammer blows and minimal slip. Drive-in stud protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated for with the long thread. Additionally, the FBN II is suitable for stand-off installations. This increases flexibility. With its standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation.