Throughbolt FBN II M8xL29mm FISCHER

The fischer stud anchor FBN II K is a steel anchor for economical fastenings in uncracked concrete. The short version is suitable for pre-positioned and push-through installation. Made of galvanised steel, the stud anchor is recommended for railings, handrails or consoles indoors. Marketing Claim: Short and strong: The economical fastening made of galvanised steel in uncracked concrete. Advantages: The standard embedment depth achieves maximum load capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth reduces the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving installation and removal of the attached component. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, this reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 60mm · Push-through installation: Yes · Thread length: 29mm · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 56mm · Pro / DIY: Pro · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 30 / -mm · Packaging variant: Folding carton · Pre-positioned installation: Yes · Max. thickness of attached component: 10mm · Max. effective length hef,stand./hef,min.: - / 10mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during installation and removal. Highest load-bearing capacity in uncracked concrete. This means: fewer fastening points and smaller anchor plates.