FBN II M8xL129mm bolt anchor, head marking: P, electro-galvanized steel, FISCHER

The fischer Bolt Anchor FBN II is a steel anchor for economic fastenings in non-cracked concrete. Thanks to its long thread and two embedment depths, the fischer Bolt Anchor FBN II is particularly flexible in use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanized steel version, the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fastening for flexible use in non-cracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities, meaning fewer fastening points and smaller anchor plates are required. The reduced embedment depth lowers the drill hole depth, which reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal slip ensure noticeably easy installation. The impact pin protects the thread from damage, saving time during assembly and disassembly of the attachment. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations, increasing flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 160mm · Push-through installation: Yes · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 156mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 40 / 30mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attached part: 100mm · Max. effective length hef,stand./hef,min.: 100 / 110mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations, increasing flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.