Stud anchor FBN II M20xL90mm 20/120 Electro-galvanised steel FISCHER

The fischer Bolt Anchor FBN II is a steel anchor for economic fixings in non-cracked concrete. Thanks to its long thread and two embedment depths, the fischer Bolt Anchor FBN II is particularly flexible to use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanized steel version, the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fixing for flexible use in non-cracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This requires fewer fixing points and smaller anchor plates. The reduced embedment depth decreases the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thereby increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it decreases the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 277mm · Push-through installation: Yes · Thread length: 90mm · Thread size (mm): 20mm · Installation torque: 200Nm · Min. drill hole depth for push-through installation: 255mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 30mm · Washer (outer diameter x thickness): 37 x 3mm · Washer (outer diameter x thickness) (1): 37mm · Washer (outer diameter x thickness) (2): 3mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 105 / 80mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 120mm · Max. usable length hef,stand./hef,min.: 120 / 145mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it decreases the drill hole depth and simplifies installation.