Fischer FBN II M16x64mm 16/15 K FVZ Stud Anchor

The fischer bolt anchor FBN II K is a steel anchor for economical fixings in uncracked concrete. The short version is suitable for pre-positioned and push-through installation. Made of hot-dip galvanized steel, the bolt anchor is recommended for railings, handrails, or consoles. Marketing Claim: Short and strong: The economical hot-dip galvanized steel fixing in uncracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This means fewer fixing points and smaller anchor plates are required. The reduced embedment depth minimizes the drill hole depth. This reduces installation effort and increases flexibility. The first hot-dip galvanized bolt anchor with variable service life covers the permissible use of the bolt anchor in humid environments and outdoors. The long thread allows for compensation of component tolerances and stand-off installations, thereby increasing flexibility. A few hammer blows and minimal tightening slip ensure noticeably easy installation. The drive-in pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With ETA approval for the hot-dip galvanized version with variable service life outdoors, depending on corrosion conditions. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 118mm · Push-through installation: Yes · Thread length: 64mm · Thread size (mm): 16mm · Installation torque: 100Nm · Min. drill hole depth for push-through installation: 104mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 24mm · Washer (outer diameter x thickness): 30 x 3mm · Washer (outer diameter x thickness) (1): 30mm · Washer (outer diameter x thickness) (2): 3mm · VdS approval: Yes · Embedment depth hef,max/hef,min: 65 / -mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 15mm · Max. effective length hef,stand./hef,min.: - / 15mm Easy installation with few hammer blows and minimal slip. Drive-in pin protects thread from damage. This saves time during assembly and disassembly. Maximum load-bearing capacity in uncracked concrete. This means fewer fixing points and smaller anchor plates.