Stud anchor FBN II M16x184mm 16/160 GS Galvanized steel FISCHER

The fischer Bolt Anchor FBN II GS with large washer is a steel anchor for economical fixings in uncracked concrete. With the pre-assembled large washer, the steel anchor made of electro-galvanized steel is recommended for fastening ledger beams and sleepers, as well as other timber constructions. Thanks to the long thread and two anchorage depths, the fischer Bolt Anchor FBN II is particularly flexible to use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. Marketing claim: The economical fixing with large washer for flexible use in uncracked concrete. Top features: The long thread compensates for component tolerances. The FBN II is also suitable for stand-off installations, which increases flexibility. The large washer increases the contact surface, ideal for fastening timber constructions. The pre-assembled washer saves time during installation. With the standard anchorage depth, the FBN II achieves maximum load-bearing capacity, meaning fewer fixing points and smaller anchor plates. If the reduced anchorage depth is used, this reduces the drill hole depth and simplifies installation. Advantages: The larger washer on the FBN II GS ensures a large contact surface, thus enabling the fastening of timber constructions. The pre-assembled washer ensures fast installation progress. The standard anchorage depth achieves maximum load capacities, meaning fewer fixing points and smaller anchor plates are required. Furthermore, the anchor is very well suited for large fixture thicknesses. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slippage ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving installation and dismantling of the fixture. Further technical specifications: · Anchor length: 278mm · Push-through installation: Yes · Thread size (mm): 16mm · Installation torque: 100Nm · Min. drill hole depth for push-through installation: 264mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 24mm · Washer (outer diameter x thickness): 56 x 5mm · Washer (outer diameter x thickness) (1): 56mm · Washer (outer diameter x thickness) (2): 5mm · VDS approval: Yes · Anchorage depth hef,max/hef,min: 80 / 65mm · Packaging variant: Folding carton · Pre-positioned installation: Yes · Max. fixture thickness: 160mm · Max. usable length hef,stand./hef,min.: 160 / 175mm The large washer increases the contact surface, ideal for fastening timber constructions. The long thread compensates for component tolerances. The FBN II is also suitable for stand-off installations, which increases flexibility. With the standard anchorage depth, the FBN II achieves maximum load-bearing capacity, meaning fewer fixing points and smaller anchor plates. The pre-assembled washer saves time during installation. If the reduced anchorage depth is used, this reduces the drill hole depth and simplifies installation.