Fischer Bolt Anchor FBN II M16x184mm 16/160 Electrogalvanized Steel

The fischer bolt anchor FBN II is a steel anchor for economical fixings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to pre-setting and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanized steel version, the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fixing for flexible use in uncracked concrete. Advantages: The standard embedment depth achieves maximum load capacities. This means fewer fixing points and smaller anchor plates are needed. The reduced embedment depth decreases the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attached part. Top Features: With the standard embedment depth, the FBN II achieves maximum load capacity. This means fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. Furthermore, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with a few hammer blows and minimal slip. Further technical properties: · Anchor length: 278mm · Push-through installation: Yes · Thread size (mm): 16mm · Installation torque: 100Nm · Min. drill hole depth for push-through installation: 264mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 24mm · Washer (outer diameter x thickness): 30 x 3mm · Washer (outer diameter x thickness) (1): 30mm · Washer (outer diameter x thickness) (2): 3mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 80 / 65mm · Packaging variant: Folding box · Pre-setting installation: Yes · Max. thickness of attached part: 160mm · Max. usable length hef,stand./hef,min.: 160 / 175mm Easy installation with a few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated with the long thread. Furthermore, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load capacity. This means fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.