Through-bolt anchor FBN II M16x164mm 16/100 GS Galvanized steel FISCHER

The fischer bolt anchor FBN II GS with large washer is a steel anchor for economical fastenings in uncracked concrete. With the pre-assembled large washer, the electro-galvanized steel anchor is recommended for fastening support beams and sleepers as well as other timber constructions. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to push-through and pre-positioned installation, the bolt anchor is also suitable for stand-off installation. Marketing claim: The economical fastening with a large washer for flexible use in uncracked concrete. Top features: The large washer increases the bearing surface. Ideal for fastening timber constructions. Pre-assembled washer saves time during installation. With the standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. The long thread compensates for component tolerances. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Advantages: The larger washer on the FBN II GS provides a large contact surface and thus enables the fastening of timber constructions. The pre-assembled washer ensures rapid installation progress. The standard embedment depth achieves the highest load-bearing capacities. This means fewer fixing points and smaller anchor plates are required. In addition, the anchor is very well suited for large fixture thicknesses. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, thus ensuring time-saving assembly and disassembly of the fixture. Further technical properties: · Anchor length: 218mm · Push-through installation: Yes · Thread size (mm): 16mm · Installation torque: 100Nm · Min. drill hole depth for push-through installation: 204mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment · Wrench size: 24mm · Washer (outer diameter x thickness): 56 x 5mm · Washer (outer diameter x thickness) (1): 56mm · Washer (outer diameter x thickness) (2): 5mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 80 / 65mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment part: 100mm · Max. usable length hef,stand./hef,min.: 100 / 115mm The large washer increases the bearing surface. Ideal for fastening timber constructions. The long thread compensates for component tolerances. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means: fewer fixing points and smaller anchor plates. Pre-assembled washer saves time during installation. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.