Fischer FBN II M16x164mm 16/100 galvanised bolt anchor

The fischer bolt anchor FBN II is a steel anchor for economical fastenings in uncracked concrete. Thanks to its long thread and two anchorage depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the stainless steel version, the bolt anchor is suitable for facade substructures, consoles and ladders in outdoor areas. Marketing Claim: The economical hot-dip galvanized steel fastening in uncracked concrete. Advantages: The standard anchorage depth achieves maximum load capacities. This means fewer fastening points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes installation effort and increases flexibility. The first hot-dip galvanized bolt anchor with variable service life covers the permissible use of the bolt anchor in damp environments and outdoors. The long thread allows for the compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slippage ensure noticeably easy installation. The impact pin protects the thread from damage, thus ensuring time-saving installation and removal of the attachment. Top Features: With ETA approval for the hot-dip galvanized version with variable service life for outdoor use depending on corrosion conditions. With the standard anchorage depth, the FBN II achieves maximum load capacity. This means fewer fastening points and smaller anchor plates. If the reduced anchorage depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slippage. Further technical characteristics: · Anchor length: 218mm · Push-through installation: Yes · Thread length: 164mm · Thread size (mm): 16mm · Installation torque: 100Nm · Min. drill hole depth for push-through installation: 204mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment · Wrench size: 24mm · Washer (outer diameter x thickness): 30 x 3mm · Washer (outer diameter x thickness) (1): 30mm · Washer (outer diameter x thickness) (2): 3mm · VDS approval: Yes · Anchorage depth hef,max/hef,min: 80 / 65mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 100mm · Max. effective length hef,stand./hef,min.: 100 / 115mm Easy installation with few hammer blows and minimal slippage. Impact pin protects thread from damage. This saves time during installation and removal. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard anchorage depth, the FBN II achieves maximum load capacity. This means fewer fastening points and smaller anchor plates. If the reduced anchorage depth is used, it reduces the drill hole depth and simplifies installation.