Fischer FBN II M12x189mm 12/140 Bolt Anchor, Electro-Galvanized Steel

The fischer stud anchor FBN II is a steel anchor for economic fixings in non-cracked concrete. Thanks to its long thread and two embedment depths, the fischer stud anchor FBN II is particularly flexible to use. In addition to push-through and pre-positioned installation, the stud anchor is also suitable for stand-off installation. In the version made of electro-galvanized steel, the stud anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fixing for flexible use in non-cracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This requires fewer fixing points and smaller anchor plates. The reduced embedment depth decreases the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows compensation for component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal setting slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with a few hammer blows and minimal slip. Further technical properties: · Anchor length: 234mm · Push-through installation: Yes · Thread size (mm): 12mm · Installation torque: 50Nm · Min. drill hole depth for push-through installation: 225mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 19mm · Washer (outer diameter x thickness): 18 x 2mm · Washer (outer diameter x thickness) (1): 18mm · Washer (outer diameter x thickness) (2): 2mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 65 / 50mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 140mm · Max. usable length hef,stand./hef,min.: 140 / 155mm Easy installation with a few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.