Anchor Bolt FBN II M12x 169mm 12/120 GS Electro-galvanized Steel FISCHER

The fischer bolt anchor FBN II GS with large washer is a steel anchor for economical fastenings in uncracked concrete. With the pre-assembled large washer, the galvanized steel anchor is recommended for fastening ledger beams and sills as well as other timber constructions. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to push-through and pre-positioned installation, the bolt anchor is also suitable for stand-off installation. Marketing claim: The economical fastening with a large washer for flexible use in uncracked concrete. Top features: The large washer increases the bearing surface. Ideal for fastening timber constructions. Pre-assembled washer saves time during installation. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Advantages: The larger washer on the FBN II GS provides a large bearing surface and thus enables the fastening of timber constructions. The pre-assembled washer ensures quick installation progress. The standard embedment depth achieves maximum load-bearing capacities. This means fewer fastening points and smaller anchor plates are required. In addition, the anchor is very well suited for thick attachments. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slippage ensure noticeably easy installation. The impact pin protects the thread from damage, thus ensuring time-saving installation and removal of the attachment. Further technical characteristics: · Anchor length: 214mm · Push-through installation: Yes · Thread size (mm): 12mm · Installation torque: 50Nm · Min. drill hole depth for push-through installation: 205mm · Pro / DIY: DIY/Pro · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 19mm · Washer (outer diameter x thickness): 44 x 4mm · Washer (outer diameter x thickness) (1): 44mm · Washer (outer diameter x thickness) (2): 4mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 65 / 50mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 120mm · Max. usable length hef,stand./hef,min.: 120 / 135mm The large washer increases the bearing surface. Ideal for fastening timber constructions. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. Pre-assembled washer saves time during installation. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation.