Anchor bolt FBN II M10x136mm 10/100 FISCHER

The fischer bolt anchor FBN II is a steel anchor for economic fixings in non-cracked concrete. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to pre-setting and push-through installation, the bolt anchor is also suitable for stand-off installation. In the electro-galvanised steel version, the bolt anchor is suitable for railings, cable trays, and consoles in interior areas. Marketing Claim: The economical fixing for flexible use in non-cracked concrete. Advantages: The standard embedment depth achieves the highest load-bearing capacities. This means fewer fixing points and smaller anchor plates are required. The reduced embedment depth minimises the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for the compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, thus ensuring time-saving assembly and disassembly of the attachment part. Top Features: With the standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, this reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 175mm · Push-through installation: Yes · Thread size (mm): 10mm · Installation torque: 30Nm · Min. drill hole depth for push-through installation: 168mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 17mm · Washer (outer diameter x thickness): 20 x 2mm · Washer (outer diameter x thickness) (1): 20mm · Washer (outer diameter x thickness) (2): 2mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 50 / 40mm · Packaging variant: Folding box · Pre-setting installation: Yes · Max. thickness of attachment part: 100mm · Max. effective length hef,stand./hef,min.: 100 / 110mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves the highest load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, this reduces the drill hole depth and simplifies installation.