Stud Anchor FBN II M10X106 Head Marking: M Electro-galvanized steel FISCHER

The fischer bolt anchor FBN II is a steel anchor for economical fastenings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly versatile. In addition to push-through and pre-positioned installation, the bolt anchor is also suitable for stand-off installation. The electrogalvanized steel version of the bolt anchor is suitable for railings, cable trays, and consoles indoors. Marketing Claim: The economical fastening for flexible use in uncracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth lowers the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving installation and removal of the attached component. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 145mm · Push-through installation: Yes · Thread size (mm): 10mm · Installation torque: 30Nm · Min. drill hole depth for push-through installation: 138mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 17mm · Washer (outer diameter x thickness): 20 x 2mm · Washer (outer diameter x thickness) (1): 20mm · Washer (outer diameter x thickness) (2): 2mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 50 / 40mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attached component: 70mm · Max. usable length hef,stand./hef,min.: 70 / 80mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during installation and removal. Component tolerances are compensated for with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation.