Through-bolt anchor FBN II M D6xL35mm 6/30 A4 FISCHER

The fischer bolt anchor FBN II is a steel anchor for economic fastenings in uncracked concrete. Thanks to the long thread and the two embedment depths, the fischer bolt anchor FBN II is particularly flexible in use. In addition to push-through and pre-positioned installation, the bolt anchor is also suitable for stand-off installation. In the stainless steel version, the bolt anchor is suitable for facade substructures, consoles and ladders outdoors. Marketing Claim: The economical fastening made of stainless steel for uncracked concrete. Advantages: The standard embedment depth achieves maximum load capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth reduces the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, thus ensuring time-saving installation and dismantling of the attachment part. Top Features: With the standard embedment depth, the FBN II achieves maximum load capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, this reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Stainless steel: permanent safety outdoors. Further technical properties: · Anchor length: 75mm · Push-through installation: Yes · Thread size (mm): 6mm · Installation torque: 7.5Nm · Min. drill hole depth for push-through installation: 70mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 10mm · Washer (outer diameter x thickness): 12 x 1.6mm · Washer (outer diameter x thickness) (1): 12mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 30 / -mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment part: 30mm · Max. usable length hef,stand./hef,min.: 30 / -mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Stainless steel: permanent safety outdoors.