Through bolt FBN II D. 8mm length 56mm head marking: A hot-dip galvanized FISCHER

The fischer bolt anchor FBN II K is a steel anchor for economical fixings in uncracked concrete. The short version is suitable for pre-positioned and push-through installation. Made of hot-dip galvanized steel, the bolt anchor is recommended for railings, handrails, or consoles. Marketing Claim: Short and strong: The economical fixing made of hot-dip galvanized steel in uncracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth lowers the drill hole depth. This reduces installation effort and increases flexibility. The first hot-dip galvanized bolt anchor with variable service life covers the permissible use of the bolt anchor in damp environments and outdoors. The long thread allows for compensation of component tolerances and stand-off installations, thus increasing flexibility. A few hammer blows and minimal slip ensure noticeably easy installation. The impact pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With ETA assessment for the hot-dip galvanized version with variable service life outdoors, depending on corrosion conditions. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, it reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Further technical properties: · Anchor length: 55mm · Push-through installation: Yes · Thread length: 24mm · Thread size (mm): 8mm · Installation torque: 15Nm · Min. drill hole depth for push-through installation: 51mm · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 30 / -mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 5mm · Max. effective length hef,stand./hef,min.: - / 5mm Easy installation with few hammer blows and minimal slip. Impact pin protects thread from damage. This saves time during assembly and disassembly. Highest load-bearing capacity in uncracked concrete. This means fewer fastening points and smaller anchor plates.