Through bolt FBN II diam. 8mm L.56mm Head stamping: A stainless steel FISCHER

The fischer stud anchor FBN II is a steel anchor for economic fastenings in non-cracked concrete. Thanks to its long thread and two embedment depths, the fischer stud anchor FBN II is particularly flexible to use. In addition to push-through and pre-positioned installation, the stud anchor is also suitable for stand-off installation. In the stainless steel version, the stud anchor is suitable for facade substructures, brackets, and ladders in outdoor areas. Marketing Claim: The economical stainless steel fastening for non-cracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This means fewer fastening points and smaller anchor plates are required. The reduced embedment depth minimises the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for the compensation of component tolerances and stand-off installations, thus increasing flexibility. Few hammer blows and minimal slip ensure noticeably easy installation. The drive-in stud protects the thread from damage, thus ensuring time-saving installation and dismantling of the attachment part. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fastening points and smaller anchor plates. If the reduced embedment depth is used, this reduces the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. The FBN II is also suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Stainless steel: permanent safety outdoors. Further technical properties: · Anchor length: 55mm · Push-through installation: Yes · Thread size (mm): 8mm · Installation torque: 10Nm · Min. drill hole depth for push-through installation: 51mm · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Wrench size: 13mm · Washer (outer diameter x thickness): 16 x 1.6mm · Washer (outer diameter x thickness) (1): 16mm · Washer (outer diameter x thickness) (2): 1.6mm · VdS approval: Yes · Embedment depth hef,max/hef,min: 30 / -mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment part: 5mm · Max. usable length hef,stand./hef,min.: - / 5mm Easy installation with few hammer blows and minimal slip. Drive-in stud protects thread from damage. This saves time during assembly and disassembly. Highest load-bearing capacity in non-cracked concrete. This means: fewer fastening points and smaller anchor plates. Stainless steel: permanent safety outdoors.