Bolt anchor FBN II D. 10mm L.106mm Head marking: F stainless steel FISCHER

The fischer bolt anchor FBN II is a steel anchor for economical fixings in uncracked concrete. Thanks to its long thread and two embedment depths, the fischer bolt anchor FBN II is particularly flexible to use. In addition to pre-positioned and push-through installation, the bolt anchor is also suitable for stand-off installation. In the stainless steel version, the bolt anchor is suitable for facade substructures, consoles and ladders in outdoor areas. Marketing Claim: The economical stainless steel fixing for uncracked concrete. Advantages: The standard embedment depth achieves maximum load-bearing capacities. This means fewer fixing points and smaller anchor plates are required. The reduced embedment depth lowers the drill hole depth. This reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and stand-off installations, thereby increasing flexibility. Few hammer blows and minimal tightening slip ensure noticeably easy installation. The drive-in pin protects the thread from damage, ensuring time-saving assembly and disassembly of the attachment. Top Features: With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. Easy installation with few hammer blows and minimal slip. Stainless steel: permanent safety outdoors. Further technical properties: · Anchor length: 105mm · Push-through installation: Yes · Thread length: 66mm · Thread dimension (mm): 10mm · Installation torque: 20Nm · Min. drill hole depth for push-through installation: 98mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment · Wrench size: 17mm · Washer (outer diameter x thickness): 20 x 2mm · Washer (outer diameter x thickness) (1): 20mm · Washer (outer diameter x thickness) (2): 2mm · VDS approval: Yes · Embedment depth hef,max/hef,min: 50 / 40mm · Packaging variant: Folding box · Pre-positioned installation: Yes · Max. thickness of attachment: 30mm · Max. usable length hef,stand./hef,min.: 30 / 40mm Easy installation with few hammer blows and minimal slip. Component tolerances are compensated with the long thread. In addition, the FBN II is suitable for stand-off installations. This increases flexibility. With the standard embedment depth, the FBN II achieves maximum load-bearing capacity. This means: fewer fixing points and smaller anchor plates. Stainless steel: permanent safety outdoors. If the reduced embedment depth is used, it lowers the drill hole depth and simplifies installation.