Through-bolt FAZ II Plus drill bit diameter 8mm /30 electrogalvanized steel

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high shear load capacities and a wide range of applications. This steel anchor is used to fasten heavy loads in cracked concrete. The FAZ II Plus can be installed more easily and quickly by eliminating bore hole cleaning (M8-M24). The proven expansion clip safely introduces loads into the concrete and allows for immediate load-bearing and high load capacity. The steel anchor is ideal, for example, for anchoring railings, cable trays, and consoles. Marketing Claim: For the highest demands. Powerful and flexible. Advantages: Quick and easier installation without bore hole cleaning (M8-M24). Numerous test reports for various substrate materials (concrete C12/15-C80/90, steel fiber concrete (aBG), solid sand-lime brick) increase the number of application fields. The new assessment (ETA) significantly increases the shear load capacities. This reduces the number of fastening points and anchors required. The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24. The quick installation process of the FAZ II Plus provides an efficient fastening solution with immediate load-bearing capacity of the fastening point for dynamic applications with low load cycles (M16-24). The ETA assessment, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire. The FAZ II Plus allows for the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the FFD filling disc during installation. Top Features: Quick and easy installation without bore hole cleaning (M8-M24). Significant increase in shear load capacity due to the new assessment (ETA) - fewer fastening points and smaller anchor plates save time and money. Millimeter-precise adaptation to loads thanks to variable embedment depths. Highest seismic loads of performance category C1 with and without the use of the FFD filling disc. Further technical characteristics: Anchor length: 95mm, Fire protection relevant: Yes, DIBT approval: Yes, Push-through installation: Yes, Fire resistance class: R120, Thread size (mm): 8mm, ICC approval: Yes, Installation torque: 20Nm, Min. drilling depth for push-through installation: 85mm, Professional / DIY: Professional, Wrench size: 13mm, Seismic approval: C1, Washer (outer diameter x thickness): 16 x 1.6mm, Washer (outer diameter x thickness) (1): 16mm, Washer (outer diameter x thickness) (2): 1.6mm, Embedment depth (reduced): 35mm, Embedment depth (standard): 45mm, Embedment depth hef,max/hef,min: 45 / 35mm, Pre-installation: Yes, Max. fixture thickness (reduced): 40mm, Max. fixture thickness (standard): 30mm, Max. fixture thickness: 30mm, Max. usable length hef,stand./hef,min.: 30 / 40mm