Bolt Anchor FAZ II Plus Drill Bit Diameter 8mm /160 Galvanized Steel

The fischer Bolt Anchor FAZ II Plus is the steel anchor for the highest demands, offering high shear capacities and a wide range of applications. This steel anchor is used to fasten heavy loads in cracked concrete. The FAZ II Plus can be installed more easily and quickly by eliminating bore hole cleaning (M8-M24). The proven expansion clip safely transfers loads into the concrete, allowing for immediate load-bearing capacity and high load resistance. This steel anchor is ideal for anchoring railings, cable trays, and brackets, for example. Marketing Claim: For the highest demands. Powerful and flexible. Advantages: Quick and easy installation without bore hole cleaning (M8-M24). Numerous test reports for various substrate materials (concrete C12/15-C80/90, steel fiber concrete (aBG), solid sand-lime brick) increase the number of application fields. The new assessment (ETA) significantly increases shear capacities, reducing the number of fastening points and anchors required. The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24. The quick installation process of the FAZ II Plus provides an efficient fastening solution for dynamic applications with low load cycles (M16-24), allowing for immediate load-bearing capacity of the fastening point. The ETA assessment, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire. The FAZ II Plus allows for the absorption of high seismic loads of performance categories C1 and C2 for diameters M10-M24 with and without the use of the FFD filling disc during installation. Top Features: Quick and easy installation without bore hole cleaning (M8-M24). Significant increase in shear capacity due to the new assessment (ETA) - fewer fastening points and smaller anchor plates save time and costs. Millimeter-precise adaptation to loads through variable embedment depths. Highest seismic loads of performance category C1 with and without the use of the FFD filling disc. Further technical characteristics: Anchor length: 225mm, Fire protection relevant: Yes, DIBT approval: Yes, Push-through installation: Yes, Fire resistance class: R120, Thread size (mm): 8mm, ICC approval: Yes, Installation torque: 20Nm, Min. bore hole depth for push-through installation: 215mm, Professional / DIY: Professional, Wrench size: 13mm, Seismic approval: C1, Washer (outer diameter x thickness): 16 x 1.6mm, Washer (outer diameter x thickness) (1): 16mm, Washer (outer diameter x thickness) (2): 1.6mm, Embedment depth (reduced): 35mm, Embedment depth (standard): 45mm, Embedment depth hef,max/hef,min: 45 / 35mm, Pre-positioned installation: Yes, Max. fixture thickness (reduced): 170mm, Max. fixture thickness (standard): 160mm, Max. thickness of the attachment: 160mm, Max. usable length hef,stand./hef,min.: 160 / 170mm