Stud anchor FAZ II Plus drill diameter 10mm /100 R stainless steel

The fischer Bolt Anchor FAZ II Plus is the steel anchor for the highest demands, offering high shear capacities and a wide range of applications. This steel anchor is used to fasten heavy loads in cracked concrete. The FAZ II Plus can be installed more easily and quickly due to the elimination of borehole cleaning (M8-M24). The proven expansion clip safely transfers loads into the concrete and enables immediately loadable, high load-bearing capacity. The steel anchor is ideal for anchoring railings, cable trays, and consoles, for example. Marketing Claim: For the highest demands. Powerful and flexible. Advantages: Quick and easy installation without borehole cleaning (M8-M24). Numerous test reports for various substrate materials (concrete C12/15-C80/90, steel fiber concrete (aBG), solid sand-lime brick) increase the number of application areas and fields of use. The new assessment (ETA) significantly increases the shear capacities. This reduces the number of fastening points and anchors required. The ETA assessment, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire. An external independent report confirms a service life of anchorages of up to 120 years. Thus, the FAZ II Plus outlasts an entire century and is perfectly suited for large, long-lasting construction projects (M10-M16). The FAZ II Plus allows for the absorption of high seismic loads of performance categories C1 and C2 for diameters M10-M24 with and without the use of the FFD filling disc during installation. The variable embedment depths allow for millimeter-precise adaptation to the loads. Top Features: Quick and easy installation without borehole cleaning (M8-M24). Stainless steel: maximum safety for outdoor use. Significant increase in shear capacity due to the new assessment (ETA) - fewer fastening points and smaller base plates save time and costs. Millimeter-precise adaptation to loads through variable embedment depths. Highest seismic loads of performance category C1 with and without the use of the FFD filling disc. Further technical properties: · Anchor length: 185mm · Fire protection relevant: Yes · DIBT approval: Yes · Push-through installation: Yes · Fire resistance class: R120 · Thread size (mm): 10mm · ICC approval: Yes · Installation torque: 45Nm · Min. drill hole depth for push-through installation: 175mm · Professional / DIY: Professional · Wrench size: 17mm · Seismic approval: C1 / C2 · Washer (outer diameter x thickness): 20 x 2mm · Washer (outer diameter x thickness) (1): 20mm · Washer (outer diameter x thickness) (2): 2mm · Embedment depth (reduced): 40mm · Embedment depth (standard): 60mm · Embedment depth hef,max/hef,min: 60 / 40mm · Pre-positioned installation: Yes · Max. fixture thickness (reduced): 120mm · Max. fixture thickness (standard): 100mm · Max. thickness of fixture: 100mm · Max. effective length hef,stand./hef,min.: 100 / 120mm