Blind rivet UniversalGrip Rivet-D4.0xL10mm Steel/Steel GESIPA

GESIPA UniversalGrip - The PolyGrip fastener for hard-to-reach riveting points For applications where, due to design constraints (interfering edges, deep recesses), very little space is available for the setting tool, the use of extended nosepieces is recommended. However, this absolutely requires a blind rivet with an extended mandrel. The UniversalGrip blind rivet is now available for these applications. The UniversalGrip combines the advantages of the PolyGrip with those of an extended mandrel and can be processed with all our special length nosepieces. Areas of application · Hard-to-reach riveting points of all kinds, e.g., riveting in profiles · Riveting near component edges THE ADVANTAGES OF THE UNIVERSALGRIP · Long mandrel - enables the use of extended nosepieces · Large clamping range - one size can replace up to five standard sizes · Economical - usable with standard tool and extended standard nosepiece · Standardization - even for small annual requirements Further technical characteristics: · Clamping range min.: 1.5mm · Head diameter: 8mm · Mandrel diameter: 2.6mm · Surface finish: galvanized · Shear strength: 1650N · Tensile strength: 2400N