Blind rivets UniversalGrip Rivet-D4.0xL10mm Aluminum/Steel GESIPA

GESIPA UniversalGrip - The PolyGrip fastener for hard-to-reach riveting points For applications where, due to design constraints (interfering edges, deep recesses), very little space is available for the setting tool, the use of extended nosepieces is recommended. However, this absolutely requires a blind rivet with an extended mandrel. For these applications, the UniversalGrip blind rivet is now available. The UniversalGrip combines the advantages of the PolyGrip with those of an extended mandrel and can be set with all our special-length nosepieces. Areas of application · Hard-to-reach riveting points of all kinds, e.g., rivets in profiles · Rivets close to component edges THE ADVANTAGES OF THE UNIVERSALGRIP · Long mandrel - enables the use of extended nosepieces · Large grip range - one size can replace up to five standard sizes · Economical - usable with standard tool and extended standard nosepiece · Standardization - also for small annual requirements Further technical characteristics: · Min. grip range: 0.5mm · Head diameter: 8mm · Mandrel diameter: 2.3mm · Shear strength: 1060N · Tensile strength: 1680N