Reinforcement thread anchor FRA L.1485mm M20-60 Concrete C12/15-C50/60 FISCHER

The fischer rebar anchor FRA is a concrete reinforcing bar with a friction-welded stainless steel threaded section. The FRA is a system component for rebar connections with fischer injection mortars FIS V · FIS V Plus and FIS EM Plus. The injection aid ensures bubble-free injection of the mortar into the drill hole. The mortar completely bonds the rebar to the drill hole wall. The fischer rebar anchor FRA is approved for post-installed lap joints · connection reinforcements and needle bar connections. Marketing Claim: Approved system for post-installed rebar connections. Advantages: The FRA with a stainless steel connection thread fully utilizes the load-bearing capacity of the concrete. This allows very high tensile loads to be introduced into the anchoring substrate. The FRA can be used with FIS SB · FIS EM Plus · FIS V or FIS V Plus injection mortars, depending on the requirements, offering maximum flexibility. When using FIS EM Plus injection mortar, installation in diamond-drilled holes is also approved. The connection thread enables the anchoring of very high tensile loads. Top Features: Maximum flexibility: Can be used with FIS SB · FIS EM Plus · FIS V and FIS V Plus injection mortars. Installation in diamond-drilled holes with FIS EM Plus. Anchoring of very high tensile loads due to the connection thread. Anchoring similar to cast-in-place rebar according to Eurocode 2 and DIN 1045-1. ETA approval. Further technical properties: · Building material: uncracked concrete, cracked concrete · Filling quantity: 160 units · Thread dimension (mm): 20mm · Length: 1485mm · Material: Stainless steel · Installation type: Through-hole installation · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment, DIBT approval · VDS approval: Yes · Packaging variant: Folding box · Max. thickness of attachment part: 60mm ETA approval. Maximum flexibility: Can be used with FIS SB, FIS EM and FIS V injection mortars. Installation in diamond-drilled holes with FIS EM. Anchoring of very high tensile loads due to the connection thread. Anchoring similar to cast-in-place rebar according to Eurocode 2 and DIN 1045-1.