Concrete screw UltraCut FBS II 6mm 80mm T30 relevant FISCHER

The fischer concrete screw UltraCut FBS II 6 SK is an anchoring solution made of electro-galvanized steel with a hexagon head for flush mounting. The UltraCut FBS II 6 SK is ideal for fastening pipes, rails, ventilation ducts, and building services equipment. When screwing the concrete screw into the drill hole with an impact driver, the thread flanks cut form-fittingly into the concrete, ensuring maximum load-bearing capacity. The low drilling effort saves time during multiple fastenings. The European Technical Assessment for cracked and uncracked concrete, as well as for seismic loads and fire resistance class R 120, guarantees an additional plus in safety. Marketing Claim: The high-performance concrete screw for maximum installation comfort. Advantages: The first concrete screw with a diameter of 6 and a variable embedment depth offers high flexibility and allows for flexible adaptation to loads. The ETA approval (Option 1) regulates use in cracked and uncracked concrete for the highest safety requirements. The first concrete screw with a diameter of 6 and an ETA approval for seismic performance category C1 for an additional plus in safety. The FBS II 6 has approval for multiple anchoring of non-load-bearing systems and is thus ideal for anchoring pipelines and cable trays in pre-stressed hollow core slabs. For vertical mounting (in ceilings and floors), drill hole cleaning is not required. For drilling in the floor, drilling must be 3x the drill diameter deeper. The different head shapes offer maximum flexibility and optimal adaptation to a wide range of applications. The concrete screw with a countersunk head allows for flush and aesthetically demanding installation. The special double angle on the underhead geometry increases the stability of the concrete screw during insertion. The approval-compliant adjustment allows the screw to be loosened twice for a total of 20 mm, shimmed by max. 10 mm, and the attached component to be aligned. The UltraCut FBS II 6 gvz. concrete screw can be used in masonry (solid building materials). The FBS II 6-10 concrete screw made of electro-galvanized steel, multi-coated steel CP, and stainless steel has an ETA for brick masonry (EN771-1), calcium silicate blocks KS (EN771-2), and calcium silicate perforated blocks KSL (EN771-2) for flexible use in various substrates. When installing the FBS II 6-10 concrete screw made of electro-galvanized steel, multi-coated steel, and stainless steel in masonry, it can also be installed between joints and in groups, on plastered masonry substrates. Top Features: The first concrete screw with a diameter of 6 and a variable embedment depth offers high flexibility and allows for millimeter-precise adaptation to loads. The ETA approval (Option 1) regulates use in cracked and uncracked concrete for the highest safety requirements. The first concrete screw with a diameter of 6 and an ETA approval for seismic performance category C1 for an additional plus in safety. Further technical features: · Material: Electro-galvanized steel · Bit size (TX): 30 · Embedment depth single point fastening ETA: 40-55mm · Embedment depth multiple fastening ETA: 25-55mm · Head-ø: 13.5mm · Min. drill hole depth for through-installation: 90mm · Usable length: Screw length - h nom · Pro / DIY: DIY/Pro · Test marks / approvals: ETA - European Technical Assessment, Fire protection classification · Screw diameter: 6mm · VDS approval: Yes Scope of delivery: 2 x concrete screws UltraCut FBS II 6 x 60/5