Concrete Screw UltraCut FBS II 6mm 60mm T30 relevant FISCHER

The fischer concrete screw UltraCut FBS II 6 SK is a galvanised steel anchoring solution with a hexagon head for flush mounting. The UltraCut FBS II 6 SK is ideal for fixing pipes, rails, ventilation ducts and HVAC systems. When the concrete screw is driven into the drill hole with an impact driver, the thread flanks cut themselves positively into the concrete, ensuring maximum load-bearing capacity. The low drilling effort saves time with multiple fixings. The European Technical Assessment for cracked and uncracked concrete as well as for seismic loads and fire suitability for fire resistance class R 120 guarantee an additional plus in safety. Marketing Claim: The powerful concrete screw for maximum installation convenience. Advantages: The first concrete screw with a diameter of 6 mm with variable screw-in depth offers high flexibility and allows flexible adaptation to loads. The ETA assessment (Option 1) regulates use in cracked and uncracked concrete for the highest safety requirements. The first concrete screw with a diameter of 6 mm with an ETA assessment for seismic performance category C1 for an additional plus in safety. The FBS II 6 has approval for the multiple anchoring of non-load-bearing systems and is therefore ideal for anchoring pipes and cable trays in pre-stressed hollow core slabs. For vertical installation (in ceilings and floors), drill hole cleaning is not required. For drilling in the floor, drilling must be 3x the drill diameter deeper. The different head shapes offer maximum flexibility and optimal adaptation to a variety of applications. The countersunk head version of the concrete screw enables flush and aesthetically pleasing installation. The special double angle on the underhead geometry increases the stability of the concrete screw when screwing in. The approval-compliant adjustment allows the screw to be loosened twice for a total of 20 mm, to be shimmed by a maximum of 10 mm and the attachment to be aligned. The UltraCut FBS II 6 gvz. concrete screw can also be used in masonry (solid material). The FBS II 6-10 concrete screw made of galvanised steel, multi-coated steel CP and stainless steel has an ETA for masonry bricks Mz (EN771-1), calcium silicate bricks KS (EN771-2) and calcium silicate perforated bricks KSL (EN771-2) for flexible use in various substrates. When installing the FBS II 6-10 concrete screw made of galvanised steel, multi-coated steel and stainless steel in masonry, it can also be installed between joints and in groups, on plastered masonry substrates. Top Features: The first concrete screw with a diameter of 6 mm with a variable screw-in depth offers high flexibility and allows millimetre-precise adaptation to loads. The ETA assessment (Option 1) regulates use in cracked and uncracked concrete for the highest safety requirements. The first concrete screw with a diameter of 6 mm with an ETA assessment for seismic performance category C1 for an additional plus in safety. Further technical characteristics: · Material: Galvanised steel · Bit size (TX): 30 · Screw-in depth single point fixing ETA: 40-55mm · Screw-in depth multiple fixing ETA: 25-55mm · Head-ø: 13.5mm · Min. drill hole depth for push-through installation: 70mm · Effective length: Screw length - h nom · Pro / DIY: DIY/Pro · Test mark / approvals: Fire protection classification, ETA - European Technical Assessment · Screw diameter: 6mm · VDS approval: Yes Scope of delivery: 2 x concrete screws UltraCut FBS II 6 x 60/5