Concrete screw UltraCut FBS II 10mm TX50 L80mm relevant FISCHER

The fischer concrete screw UltraCut FBS II SK R with the specially hardened red tip is a powerful anchoring solution for quick installation. The concrete screw with the pressed-on washer is ideal for outdoor applications or in damp rooms. The European Technical Assessment for cracked and uncracked concrete, as well as for seismic loads and fire suitability for fire resistance class R 120, guarantee an additional plus in safety. The saw-tooth geometry enables quick and effort-saving installation. No drill hole cleaning is required when installing in ceilings and floors. The expansion-pressure-free anchoring allows for minimal edge and axial distances. Marketing Claim: The powerful concrete screw for maximum installation comfort outdoors. Advantages: The specially hardened red tip ensures noticeably faster and safer installation. The stainless steel version of the concrete screw ensures very high corrosion protection and thus allows for application in damp rooms and outdoors. The special saw-tooth geometry enables quick cutting into the concrete. For vertical installation (in ceilings and floors) and the use of hollow drill bits, drill hole cleaning is not necessary. When drilling into the floor, drilling must be 3x the drill diameter deeper. The ETA assessment covers the application in cracked concrete, as well as seismic performance categories C1 and C2. The approval-compliant adjustment allows the concrete screw to be loosened 2x, the attachment to be shimmed and/or aligned. Three approved embedment depths allow for use in a wide variety of applications, thus providing great flexibility. The short version with reduced embedment depth enables a shallow drill hole depth, quick installation, and fewer rebar hits. The concrete screw FBS II 6-10 made of electrogalvanized steel, multi-coated steel CP, and stainless steel has an ETA for the bricks solid brick Mz (EN771-1), sand-lime brick KS (EN771-2), and perforated sand-lime brick KSL (EN771-2) for flexible use in various substrates. When installing the concrete screw FBS II 6-10 made of electrogalvanized steel, multi-coated steel, and stainless steel in masonry, it can also be installed between the joints and in groups, on plastered masonry substrates. Top Features: The specially hardened red tip ensures noticeably faster and safer installation. The stainless steel version of the concrete screw ensures very high corrosion protection and thus allows for application in damp rooms and outdoors. The approval-compliant adjustment allows the concrete screw to be loosened 2x, the attachment to be shimmed and/or aligned. Further technical characteristics: · Material: Stainless steel · Bit size (TX): 50 · Head-ø: 21mm · Min. drill hole depth for push-through installation: 90mm · Nominal embedment depth / fixture thickness: 55 / 25mm · Professional / DIY: Professional · Test marks / approvals: Fire protection classification, seismic, ETA - European Technical Assessment · Screw dimension: 12.0 x 80mm · Screw diameter: 10mm · VDS approval: Yes · Packaging variant: Folding box