Concrete screw UltraCut FBS II 10mm AF 15 L70mm relevant FISCHER

The fischer UltraCut FBS II US R concrete screw with the specially hardened red tip is a high-performance anchoring solution for quick installation. The concrete screw with the pre-assembled washer is ideal for outdoor applications or in damp rooms. The European Technical Assessment for cracked and uncracked concrete as well as for seismic loads and fire suitability for fire resistance class R 120 guarantee an additional plus in safety. The saw-tooth geometry enables quick and effortless installation. No borehole cleaning is required when installing in ceilings and floors. The expansion-pressure-free anchoring allows for minimal edge and axial distances. Marketing Claim: The high-performance concrete screw for maximum installation comfort outdoors. Advantages: The specially hardened red tip ensures noticeably faster and safer installation. The stainless steel version of the concrete screw guarantees very high corrosion protection, allowing it to be used in damp rooms and outdoors. The special saw-tooth geometry enables quick cutting into the concrete. For vertical installation (in ceilings and floors) and when using hollow drill bits, borehole cleaning is not required. When drilling into the floor, drilling must be 3x the drill diameter deeper. The ETA assessment covers use in cracked concrete, as well as seismic performance categories C1 and C2. The approval-compliant adjustment allows the concrete screw to be loosened twice, the attachment to be shimmed and/or aligned. Three approved screw-in depths enable use for a wide variety of applications and thus ensure great flexibility. The short version with reduced screw-in depth allows for a shallow drill hole depth, quick installation and fewer rebar hits. The FBS II 6-10 concrete screw made of galvanized steel, multi-coated steel CP and stainless steel has an ETA for masonry bricks Mz (EN771-1), calcium silicate solid brick KS (EN771-2) and calcium silicate perforated brick KSL (EN771-2) for flexible use in different substrates. When installing the FBS II 6-10 concrete screw made of galvanized steel, multi-coated steel and stainless steel in masonry, it can also be installed between the joints and in groups, on plastered masonry substrates. Top Features: The specially hardened red tip ensures noticeably faster and safer installation. The stainless steel version of the concrete screw guarantees very high corrosion protection, allowing it to be used in damp rooms and outdoors. The approval-compliant adjustment allows the concrete screw to be loosened twice, the attachment to be shimmed and/or aligned. Further technical properties: · Material: Stainless steel · Head-ø: 20.5mm · Min. drill hole depth for push-through installation: 80mm · Nominal embedment depth / attachment thickness: 55 / 15mm · Professional / DIY: Professional · Test marks / approvals: ETA - European Technical Assessment, Seismic, Fire protection classification · Wrench size: 15mm · Screw dimensions: 12.0 x 70mm · Screw diameter: 10mm · VDS approval: Yes · Packaging variant: Folding carton