Anchor rod FIS A M16 x 175 A4 external thread stainless steel FISCHER

The fischer anchor rod FIS A is made of stainless steel. The anchor rod is a system component for the various fischer injection mortars. In conjunction with the injection mortars, the fischer anchor rod is suitable or approved for all substrates. For the maximum load-bearing capacity of the system, thorough bore hole cleaning is recommended. The system consisting of a stainless steel anchor rod in conjunction with fischer injection mortars is suitable or approved for outdoor and damp room fixings without aggressive conditions. Marketing Claim: The versatile stainless steel anchor rod FIS A. Advantages: The anchor rod FIS A can be used with almost all fischer injection mortars (not with Highbond special mortar FIS HB) and selected individually according to requirements. This enables a wide range of applications. The wide range of approved anchor rods FIS A from M6 to M30 opens up variable application possibilities. Please note the approvals of the respective mortars. First dynamic load specifications in an ETA for anchoring light dynamic loads with threaded rods in cracked and non-cracked concrete in conjunction with injection mortar FIS SB and reaction cartridge RSB. Top Features: The universal solution for various fischer injection mortars. For a manageable product range and simplified warehousing. In combination with the various fischer injection mortars approved for anchoring in cracked and non-cracked concrete · solid brick masonry · perforated brick masonry and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces assembly and material costs. Stainless steel for outdoor use. · further dimensions on request Further technical properties: · Design: External thread · Material: Stainless steel · Building material: Cracked concrete, perforated brick masonry, solid brick masonry · Nominal drill diameter in wood: 18 / 20mm · ETA dyn: Yes · Thread size (mm): 16mm · Nut height: 12.8mm · Washer height: 3mm · Min. drill hole depth: 80mm · Min. embedment depth: 80mm · Min. embedment depth in solid brick: 50mm · Min. embedment depth according to ETA: 50mm · Suitable injection anchor sleeve: FIS H 20 x 85 K FIS H 20 x 130 K · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Protrusion: 9mm · VDS approval: Yes · Max. fixture thickness: 75mm · Max. usable length in solid brick: 105mm · Max. embedment depth: 154mm The universal solution for various fischer injection mortars. For a manageable product range and simplified warehousing. Stainless steel for outdoor use. In combination with the various fischer injection mortars approved for anchoring in cracked and non-cracked concrete, solid brick masonry, perforated brick masonry and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces assembly and material costs.