Anchor rod FIS A M16 x 130mm external thread steel electro-galvanized 8.8 FISCHER

The fischer anchor rod FIS A is made of electrogalvanized steel with steel grade 8.8. The anchor rod is a system component for various fischer injection mortars. In conjunction with injection mortars, the fischer anchor rod is suitable or approved for all substrates. For maximum load-bearing capacity of the system, thorough drill hole cleaning is recommended. The system consisting of electrogalvanized anchor rod in conjunction with fischer injection mortars is suitable or approved for fastenings in dry indoor areas. Marketing Claim: The versatile anchor rod FIS A. Advantages: The anchor rod FIS A can be used with almost all fischer injection mortars (not with Highbond special mortar FIS HB) and can be individually selected depending on requirements. This enables a wide range of applications. The wide range of approved FIS A anchor rods from M6 to M30 offers variable application possibilities. Please refer to the approvals of the respective mortars. First dynamic load values in an ETA for anchoring light dynamic loads with threaded rods in cracked and uncracked concrete in conjunction with injection mortar FIS SB and capsule RSB. Top Features: The universal solution for various fischer injection mortars. For a manageable assortment and simplified inventory management. Approved in combination with various fischer injection mortars for anchoring in cracked and uncracked concrete, solid brick masonry, perforated brick masonry, and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs. Further technical properties: · Version: External thread · Material: Electrogalvanized steel 8.8 · Building material: Cracked concrete, perforated brick masonry, solid brick masonry · Nominal drill diameter in wood: 18 / 20mm · ETA dyn: Yes · Thread size (mm): 16mm · Nut height: 12.8mm · Washer height: 3mm · Min. embedment depth: 80mm · Min. embedment depth in solid brick: 50mm · Min. embedment depth according to ETA: 50mm · Suitable injection anchor sleeve: FIS H 20 x 85 K · Professional / DIY: Professional · Test mark / Approvals: ETA - European Technical Assessment · Projection: 9mm · VDS approval: Yes · Max. fixture thickness: 30mm · Max. effective length in solid brick: 60mm The universal solution for various fischer injection mortars. For a manageable assortment and simplified inventory management. Approved in combination with various fischer injection mortars for anchoring in cracked and uncracked concrete, solid brick masonry, perforated brick masonry, and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs.