Anchor rod FIS A M12 x 160 A4 external thread stainless steel FISCHER

The fischer threaded rod FIS A is made of stainless steel. The threaded rod is a system component for various fischer injection mortars. In conjunction with injection mortars, the fischer threaded rod is suitable and approved for all substrates. Thorough borehole cleaning is recommended for maximum system load-bearing capacity. The system comprising a stainless steel threaded rod in conjunction with fischer injection mortars is suitable and approved for outdoor and damp room fixings without aggressive conditions. Marketing Claim: The versatile stainless steel threaded rod FIS A. Advantages: The FIS A threaded rod can be used with almost all fischer injection mortars (not with Highbond special mortar FIS HB) and selected individually according to requirements. This enables a wide range of applications. The wide range of approved FIS A threaded rods from M6 to M30 offers variable application possibilities. Please observe the approvals for the respective mortars. First dynamic load data in an ETA for anchoring light dynamic loads with threaded rods in cracked and non-cracked concrete in conjunction with injection mortar FIS SB and capsule RSB. Top Features: The universal solution for various fischer injection mortars. For a manageable product range and simplified stock keeping. In combination with the various fischer injection mortars, approved for anchoring in cracked and non-cracked concrete, solid brick masonry, perforated brick masonry, and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs. Stainless steel for outdoor use. · further dimensions on request Further technical features: · Version: external thread · Building material: cracked concrete, perforated brick masonry, solid brick masonry · Nominal drill bit diameter in wood: 14 / 16mm · ETA dyn: Yes · Thread size (mm): 12mm · Nut height: 9.6mm · Washer height: 2mm · Min. drill hole depth: 80mm · Min. embedment depth: 70mm · Min. embedment depth in solid brick: 50mm · Min. embedment depth according to ETA: 50mm · Suitable injection anchor sleeve: FIS H 20 x 85 K FIS H 20 x 130 K · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Protrusion: 8mm · VDS approval: Yes · Max. fixture thickness: 74mm · Max. usable length in solid brick: 94mm · Max. embedment depth: 144mm · Min. / max. embedment depth in aerated concrete in undercut borehole: 75 / 95mm The universal solution for various fischer injection mortars. For a manageable product range and simplified stock keeping. Stainless steel for outdoor use. In combination with the various fischer injection mortars, approved for anchoring in cracked and non-cracked concrete, solid brick masonry, perforated brick masonry, and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs.