Threaded Rod FIS A M12 x 140 A4 External Thread Stainless Steel FISCHER

The fischer threaded rod FIS A is made of stainless steel. The threaded rod is a system component for the various fischer injection mortars. In conjunction with the injection mortars, the fischer threaded rod is suitable and approved for all substrates. For maximum load-bearing capacity of the system, thorough borehole cleaning is recommended. The system consisting of a stainless steel threaded rod in conjunction with fischer injection mortars is suitable and approved for outdoor and damp room fixings without aggressive conditions. Marketing Claim: The versatile stainless steel threaded rod FIS A. Advantages: The FIS A threaded rod can be used with almost all fischer injection mortars (not with Highbond special mortar FIS HB) and can be selected individually according to requirements. This enables a wide range of applications. The wide range of approved FIS A threaded rods from M6 to M30 opens up variable application possibilities. Please refer to the approvals for the respective mortars. First dynamic load values in an ETA for anchoring light dynamic loads with threaded rods in cracked and uncracked concrete in conjunction with injection mortar FIS SB and reaction cartridge RSB. Top Features: The universal solution for various fischer injection mortars. For a manageable assortment and simplified warehousing. Approved in combination with the various fischer injection mortars for anchoring in cracked and uncracked concrete · solid brick masonry · perforated brick masonry and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs. Stainless steel for outdoor use. · further dimensions on request Additional technical features: · Version: External thread · Building material: cracked concrete, solid brick masonry, perforated brick masonry · Drill nominal diameter in wood: 14 / 16mm · ETA dyn: Yes · Thread size (mm): 12mm · Nut height: 9.6mm · Washer height: 2mm · Min. drill hole depth: 80mm · Min. embedment depth: 70mm · Min. embedment depth in solid brick: 50mm · Min. embedment depth according to ETA: 50mm · Suitable injection anchor sleeve: FIS H 20 x 85 K · Professional / DIY: Professional · Test mark / approvals: ETA - European Technical Assessment · Protrusion: 8mm · VDS approval: Yes · Max. fixture thickness: 54mm · Max. effective length in solid brick: 74mm · Max. embedment depth: 124mm · Min. / max. embedment depth in aerated concrete in undercut borehole: 75 / 95mm The universal solution for various fischer injection mortars. For a manageable assortment and simplified warehousing. Stainless steel for outdoor use. Approved in combination with the various fischer injection mortars for anchoring in cracked and uncracked concrete, solid brick masonry, perforated brick masonry and aerated concrete. Optimal load adaptation through variable embedment depth. This reduces installation and material costs.