Anchor FHB-A 16x125/80 Special Anchor Rod FISCHER

The fischer Highbond anchor dynamic FHB-A dyn is made of electro-galvanized steel. The force-controlled expansion adhesive anchor is installed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the cones of the anchor rod are drawn into the mortar capsule, which braces itself against the borehole wall. During installation, the injection mortar FIS HB fills the annular gap in the fixture and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fastening elevator guide rails, industrial robots, or gantry and overhead cranes indoors. Marketing Claim: The ultimate performance in dynamic anchors Advantages: The Highbond anchor rod dynamic FHB-A dyn is installed in conjunction with the Highbond special mortar FIS HB. The injection mortar FIS HB fills the annular gap in the fixture during installation and ensures optimal load distribution. This allows for the absorption of dynamic pulsating and alternating loads. The cone geometry of the FHB-A dyn anchor rod ensures secure post-expansion under dynamic stress, thus enabling use in cracked concrete. The FHB-A dyn anchor rod is also available in highly corrosion-resistant steel. This makes it suitable for applications in aggressive atmospheres, e.g., tunnels. The Highbond anchor dynamic system achieves even higher shear forces with the additional sleeve on the FHB-A dyn V anchor rod, thus offering an increased level of safety. The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchorage substrate of steel fiber reinforced concrete. Top Features: Secure post-expansion under dynamic loading due to cone geometry. Absorption of dynamic pulsating and alternating loads due to optimal load distribution. Approved for cracked concrete and, according to ETA for static and quasi-static loads, for M12 / M16 also for use in steel fiber reinforced concrete as an anchorage substrate. Further technical specifications: · Building material: cracked concrete · Drill hole diameter in fixture: 19mm · DIBT approval: Yes · Thread size (mm): 16mm · Min. drill hole depth for through-installation: 210mm · Professional / DIY: Professional · Wrench size: 24mm · Packaging type: Folding carton · Min. / max. usable length: 10 - 80mm