{"product_id":"facherschleifer-o80xh30mm-kornung-120-aluminium-schaft-o-6-mm-pferd","title":"Flap Wheel Ø80xH30mm Grit 120 Aluminum Shank Ø 6 mm PFERD","description":"Aluminum oxide A · with abrasive flaps on a backing pad · for universal use from coarse to fine grinding · shank Ø 6 mm · Also suitable for processing brass, copper and zinc · Shank Ø: 6mm · Drive type: Flexible shaft drive, Straight grinder · Application recommendation: Reducing contact pressure and peripheral speed as well as adding grinding oil reduce tool wear and the thermal load on the workpiece. An increase in removal rate should be achieved by using a coarser grit and not by increasing the contact pressure, in order to prevent unnecessary tool wear and thermal load on the workpiece. Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be processed, the coarser the surface (when using, use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15–20 m\/s. This achieves an ideal compromise between removal rate, surface finish, thermal load on the workpiece and tool wear. · Workable materials: Steels up to 1,200 N\/mm² (54 HRC, stainless steel (INOX) · Processing tasks: Equalizing, surface finishing, texturing (matting, brush finishing and satin finishing), stepwise fine grinding, weld seam processing, deburring · Width: 30mm · Note: PFERDERGONOMICS recommends flap wheels to sustainably reduce vibration and noise generated during use and to improve working comfort. · Length, shank: 40mm · RPM, opt.: 4800RPM · Safety instructions: The specified maximum permissible speed must never be exceeded for safety reasons. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded for open shank lengths. · Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is continuously released. Optimal contour adaptation due to high flexibility. Frontal use very close to edges and in corners possible due to flat cast core construction.","brand":"Pferd","offers":[{"title":"1","offer_id":56578004484482,"sku":"WCW-0102038-001","price":67.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/3675\/7890\/files\/6_4_d_6_64d6d4920a1b8cf134a5373942c682495df91973_wcw_0102038_gl_image1_14822_dda65b5a0448ac4b3fd6d0e409b7847d_all.jpg?v=1776754669","url":"https:\/\/shop.we-connect.work\/en\/products\/facherschleifer-o80xh30mm-kornung-120-aluminium-schaft-o-6-mm-pferd","provider":"weconnectwork","version":"1.0","type":"link"}