{"product_id":"facherschleifer-o60xh40mm-kornung-60-aluminium-schaft-o-6-mm-pferd","title":"Flap wheel Ø60xH40mm grit 60 aluminum shank-Ø 6 mm PFERD","description":"Corundum A · with abrasive flaps on backing material · for universal use from coarse to fine grinding · Shank Ø 6 mm · Also suitable for machining brass, copper and zinc · Shank-Ø: 6mm · Drive type: Flexible shaft drive, straight grinder · Recommended application: Use grinding oil suitable for the material to significantly increase the tool life and grinding performance of the tools. Reducing the contact pressure and peripheral speed as well as adding grinding oil reduce tool wear and temperature stress on the workpiece. An increase in removal rate should be achieved by using a coarser grit and not by increasing the contact pressure, in order to prevent unnecessary tool wear and temperature stress on the workpiece. Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using), For best performance, use at a recommended cutting speed of 15–20 m\/s. This achieves an ideal compromise between removal rate, surface finish, temperature stress on the workpiece and tool wear. · Machinable materials: Grey\/ductile cast iron (GG\/GJL, GGG\/GJS), aluminium, malleable cast iron, brass, copper, hardened, tempered steels over 1,200 N\/mm² (54 HRC, steels up to 1,200 N\/mm² (\u003c 38 HRC), cast steel · Machining tasks: Step-by-step fine grinding, weld seam processing, surface machining, levelling, deburring, texturing (matting, brush finishing and satin finishing) · Width: 40mm · Note: PFERD ERGONOMICS recommends flap wheels to sustainably reduce vibration and noise generated during use and to improve working comfort. · Length, shank: 40mm · RPM, opt.: 6300RPM · Safety instructions: The specified maximum permissible speed must never be exceeded for safety reasons. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded for open shank lengths. · Advantages: End-face use very close to edges and in corners possible due to flat core construction. Optimal contour adaptation due to high flexibility. Consistently high material removal over the entire tool life, as new, aggressive abrasive is continuously released.","brand":"Pferd","offers":[{"title":"10","offer_id":56578002747778,"sku":"WCW-0102034-001","price":614.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/3675\/7890\/files\/a_3_e_5_a3e5e32a6cbcacb91bb99486580b00398c2572d8_wcw_0102034_gl_image1_14822_9303abf9ed19317a8cbdaf0ff65546a9_all.jpg?v=1776754656","url":"https:\/\/shop.we-connect.work\/en\/products\/facherschleifer-o60xh40mm-kornung-60-aluminium-schaft-o-6-mm-pferd","provider":"weconnectwork","version":"1.0","type":"link"}