{"product_id":"facherschleifer-o10xh10mm-kornung-120-korund-schaft-o-3-mm-pferd","title":"Flap Wheel Ø10xH10mm Grit 120 Aluminum Oxide Shank-Ø 3 mm PFERD","description":"Resin bond · universally applicable · also suitable for machining brass, copper and zinc · Shank-? 3 mm · Shank-Ø: 3mm · Drive type: Flexible shaft drive, Straight grinder · Recommended application: Increased stock removal should be achieved by using a coarser grit and not by increasing the contact pressure, in order to prevent unnecessary tool wear and thermal stress on the workpiece. For best performance, use at a recommended cutting speed of 15–20 m\/s. This achieves an ideal compromise between stock removal rate, surface finish, thermal stress on the workpiece, and tool wear. Reducing the contact pressure and peripheral speed, as well as adding grinding oil, reduce tool wear and thermal stress on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using · Machinable materials: Steels up to 1,200 N\/mm² (54 HRC · Machining tasks: Weld seam processing, surface processing, texturing (matting, brush finishing and satin finishing), equalizing, gradual fine grinding, deburring · Width: 10mm · Note: PFERDERGONOMICS recommends flap wheels to sustainably reduce vibration and noise development during use and to improve working comfort. · Length, shank: 40mm · RPM, opt.: 38000RPM · Safety instructions: The stated maximum permissible speed must never be exceeded for safety reasons. The contact pressure must be significantly reduced if the stated optimal speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the stated maximum speed is not exceeded with open shank lengths. · Advantages: Optimal contour adaptation due to high flexibility. Frontal use very close to edges and in corners possible due to flat core construction. Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released.","brand":"Pferd","offers":[{"title":"10","offer_id":56573586735490,"sku":"WCW-0058333-001","price":362.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/3675\/7890\/files\/2_8_6_3_28633eb5a1f4fe74a43b1cf6bc05e699db875d16_wcw_0058333_gl_image1_p_4000842517_01_all.jpg?v=1776607746","url":"https:\/\/shop.we-connect.work\/en\/products\/facherschleifer-o10xh10mm-kornung-120-korund-schaft-o-3-mm-pferd","provider":"weconnectwork","version":"1.0","type":"link"}